The Densen B-250 has established itself as a reference preamplifier on the high end market over the years. Now Densen introduces the B-250CAST. Taking many of the innovations from the B-275 Super Leggera preamp, the B-250CAST offers a new level of performance from the renowned B-250. The B-250CAST is filled with advanced solutions, which all share the goal of giving you even more musicality.
CAST AMP has a dedicated Densen CAST powersupply, which is an extreme low noise PSU, to secure that the GOOGLE CAST has perfect working conditions. On top of that, the Densen CAST AMP has a dedicated optical input, allowing the GOOGLE CAST to perform at its best, with the highest possible data quality. Densen has even developed a dedicated power cord to connect the GOOGLE CAST to the CAST AMP. This powercord is shielded, to avoid interference, and securing an optimal performance. Further a Densen developed a Toslinkcable to complete the setup, and naturally, this optical cable is optimized for use between the GOOGLE CAST and the CAST AMP.
> Sensitivity : 89 dB/w 2.8v (1m)
> Nominal Impedance : 8 Ohms
> Power Handling : 100 Watts
> Dimensions : 4″ Sphere
> Weight : 795g
> Cone Material : Mical Polypropylene Compound
> Enclosure Material : Mild Steel
> Warranty: 5 Years Parts and Labour
> Frequency Response: On wall : 76Hz to 20Khz / On floor stand: 95Hz to 20Khz
> Sensitivity : 88 dB/w
> Nominal Impedance : 8 Ohms
> Power Handling : Full range : 50 Watts / Crossover : 100 Watts
> Height on Floor Stand : 37″
> Driver : 3″ full range
> Dimensions : 5″ Sphere
> Droplet A’Diva : Weight – 1795g
> Droplet A’Diva SE : Weight – 1485g
> Droplet Micro : Weight – 1175g
> Droplet Micro SE : Weight – 1155g
All other specifications as per individual units:
> A’Diva
> A’Diva SE
> Micro
> Micro SE
> Frequency Response : 68Hz to 20hz +/- 3db
> Sensitivity : 90 dB/1 Watt/1 meter
> Nominal Impedance : 8 Ohms
> Power Handling : 150 Watts RMS
> Finishes : Brushed stainless steel spheres with a black frame.
> Tweeter : Patented CDT3
> Woofers : Two 4″
> Crossovers : None
> In-room frequency response : 18Hz – 180Hz +/- 3db
> Digital power amp : 300 Watts RMS, 600 Watts max.
> Phase : 0/180 switch
> Low pass : 50 to 180Hz, continuously variable with LFE by-pass switch
> High pass : 100Hz fixed, 1st order on high-level output
> Bass EQ : 0, +3dB, +6dB 25 Hz center frequency
> Power : Auto/On/Off: toggle Switch
> Dimensions : 275mm (W) x 305mm (H) x 345mm (D)
> Frequency Response : 32Hz – 220Hz +/- 3db
> Digital Power Amp : 150 Watts
> Woofer : 8″ woofer with PP cone and NBR surround
> Phase : 0 – 180º continuously variable
> Active low pass filter : 50 to 180Hz, continuously variable
> Power : Auto/On/Off: toggle switch
> Dimensions : 475mm (W) x 305mm (H) x 180mm (D)
> Weight : 10.5kg
> Enclosure Material : MDF (Medium Density Fibreboard)